Iscar is launching Penta 34 carbide inserts with a unique PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer by having a distinctive frontal edge.
The completely new chipformer was designed for machining soft materials. It is an fantastic solution for parting bearing steel and other exceptionally ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.
The combination of the new chipformer and IC908 grade provides incredible chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the versatile IC908 PVD coated grade. The new family expands the application range of Iscar's largest practical grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when compared to a competitor's tool, is a attractive solution for machining any soft and ductile material.
Iscar's Upgrades for Parting
Iscar has developed a unique family of reinforced Tang-Grip blades for the popular TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced construction, can be utilized in long overhang. Only the part of the blade necessary for penetration (cutting depth) has a reduced width. The remainder is thick, which provides improved rigidity and stiffness. These blades are an amazing solution for parting and grooving in between the main and sub-spindle of turn/mill machines. The single-ended insert has a very rigid clamping and therefore provides a extremely substantial advantage over any other system.
Further additions to Iscar's Grip family are Do-Grip carbide inserts made from the revolutionary Sumo Tec carbide grades: IC807 IC808 and IC830. The revolutionary Sumo Tec grades extremely extend insert life, due to the most advanced coating technology followed by a specific surface treatment. This also provides improved tool life due to decreased surface stress and an evenly coated top surface. The even surface contributes to continuous uninterrupted chip flow, less induced heat and less friction. The new process increases toughness and chipping resistance and thus reduces friction and built-up edge. This in turn enhances and prolongs tool life at elevated machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, using the unique surface treatment.
Iscar's Chip Splitting Inserts
Iscar's new HM90 APCR 220605-CS grooved carbide inserts put an end to chip jamming obstacles in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts fashioned specially for aluminum milling. With two grooves pressed into each polished cutting face, the inserts split aluminum chips into a easy size for easy, reliable evacuation despite the application's characteristic large chip volume. The 22 mm inserts, each with two edges, are designed to optimize metal removal over the extensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work notably well with Iscar's revolutionary HM90 EAL/FAL...22 aluminum rough milling cutters. Besides reliably clearing chips, the inserts conserve power and decrease chatter in long-overhang setups. The inserts feature a cavity on the bottom to be sure correct mounting in cutter chip pockets equipped with normal spring pins. For optimum chip control, Iscar recommends using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.
The Newest In Carbide Endmill Configuration In A Extended And Outstanding Family From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Some Of Improvements In Carbide Inserts Coming From Iscar From Over The Last Decade
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Iscar Announces A Completely New Line Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Iscar Recently Releases Numerous Original Lines To Continue Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
New End Mills Coming From Iscar Will Boost Productivity While Cutting Down Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
A Number Of Improvements In Carbide Inserts Thanks To Iscar Across The Last Decade
Iscar is announcing a brand new unique milling system that includes tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has meaningful advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, decreased cutting forces resulting in better performance.
Industrial Water Heater - Considering All Of Your Needs - Study Carefully In Order To Know More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.
Brand-New Car Manufacturing Jobs To Help In Preserving The Overall Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
The Truth On The Graduate Professions Obtainable In Europe.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.
Related Articles
Blogroll